1. Turn the power on. If it is already on, turn the power off and on again.
  2. Disconnect all cables from your computer, except the power cord and any USB or Ethernet cable used for updating the firmware.
  3. Click [Next] to start the product update.

- Do not use the product until the firmware update is complete.
- It may take up to 15 minutes to complete the update. You cannot cancel or interrupt the update.
- If the firmware update fails and the product goes into recovery mode (indicated by flashing status lights), you will not be able to update the product's firmware over a network connection. Connect your computer to the product using a USB cable instead and try updating the firmware again. See the documentation or visit Epson.com. to check if the product is in the recovery mode.
- If the product is running on the battery, connect the power cable.